Flooding detector - FLO*

The new flood detecting device is able to sense the presence of water in an environment.
It is generally used to protect against flooding in computer rooms, offices, laboratories, special environments. It is made up of a detector (normally fitted on the electrical panel) and a sensor (installed in the position being checked).
When the sensor is wet by the water, the alarm is automatically activated on the detector, switching the status of the relay.

Technical features
Power supply	24 Vac (-15%...+10%), 50/60 Hz
Power input	1.5VA
Operating conditions	-10 to 60°C, <90% H.R. non-condensing
Alarm relay output circuit	250 Vac 2A resistive, 2A inductive, cosφ =0.4, 2 (2) A, according to EN60730-1 (100.000 cycles)
Maximum length of the probe connection cable	500 m with single wire cable and double insulation
Cross-section of the connection cable	1.5 mm²
Standard compliance	CE EN 6000-6-2, EN 6000-6-4 (EMC), EN 61010-1 (safety)
Index of protection	IP40

LITERATURE:

Brochure

	Flooding sensor detector

Function

air-conditioning controls
humidification
refrigeration controls
telemaintenance systems